1. Product Description: Our company produces wrought magnesium alloys according to ASTM B 93 / B 93M production, production size varied by deforming sheet, pipe, magnesium ribbon, rods and profiles of various magnesium products, and through the organization of material control application and heat treatment process, to obtain higher strength, better ductility and better mechanical properties. Products are mainly used in aerospace, transportation, 3C products and other building projects in the field of aviation. 2. The chemical composition of wrought magnesium alloy ASTM B 93 / B 93M AZ31B AZ31D AZ61A AZ80A Al% 2.50-3.50 2.50-3.50 5.80-7.20 7.80-9.20 Mn% 0.20-1.00 0.20-1.00 0.15-0.50 0.12-0.50 Cu% 0.01max 0.01 max 0.05max 0.05max Fe% 0.005max 0.002max 0.005max 0.005max Si% 0.10max 0.05max 0.10max 0.10max Zn% 0.60-1.40 0.60-1.40 0.40-1.50 0.20-0.80 Ni% 0.005max 0.001max 0.005max 0.005max Others each% 0.05max 0.01max -------- -------- Others total% 0.30max -------- 0.30max 0.30max Mg BALANCE BALANCE BALANCE BALANCE NOTE: meet ASTM, etc. The basic requirements for a standard, but you can control the ingredients and product specifications according to specific needs. 3. The mechanical properties of magnesium alloy deformation alloy ASTM tensile mechanical properties of the application (N / MM2) yield strength (N / mm) Elongation - AZ31B 230 ~ 290 170 ~ 210 10 ~ 24 standard extruded alloy AZ61A 270 ~ 390 190 ~ 2409 ~ 15 high-strength extruded alloy AZ80A 330 ~ 360 230 ~ 250 8 ~ 10 high-strength extruded alloy 4. Size can produce according to user needs